Honda Acura 08+ Factory Radio Add A Subwoofer Amplifier Plug & Play Wire Harness
Want to add a subwoofer to your original stereo?
Don’t want or know how to cut into your wiring?
Take the wiring guess work out of the installation with this plug and play wire harness! Installation is as easy as 1, 2, 3!
1. Remove your OEM factory radio
2. Unplug the OEM factory wiring and plug in this wire harness
3. Reinstall your OEM factory radio
What is it?
This wire harness provides a connection for one set of RCA cables to provide an audio signal to an external amplifier. Also pre-installed on the harness is a remote amplifier turn on wire. This wire, along with a set of RCA cables, is run to your aftermarket amplifier. All that’s left for you to do is connect the main power wire from your battery and ground. (Not included)
What you will receive
• One (1) plug and play wire harness
• One (1) 10ft RCA Cable (RCA pictured is for reference only, colors may vary)
Compatibility Notes
• Audio volume to the amplifier can be adjusted by the dials on the harness. For easier access we recommend using an external volume knob.(Not included but we can provide one for a fee.)
• A variety of wire colors may be used for the remote wire coming off the harness. Regardless of color, rest assured it is for the remote turn on of an amplifier.
Compatibility
Make
MODEL
FROM
TO
Acura
TL (with nav)
2009
2014
Acura
TL (without nav)
2009
2014
Acura
TSX (with nav)
2009
2014
Acura
TSX (without nav)
2009
2014
Honda
Accord (without nav) (with auto climate)
2013
2017
Honda
Accord (without nav) (with manual climate)
2013
2017
Honda
Accord (with nav) (gunmetal)
2008
2012
Honda
Accord (with nav) (taupe)
2008
2012
Honda
Accord (without nav) (with auto climate) (gunmetal)
2008
2012
Honda
Accord (without nav) (with auto climate) (taupe)
2008
2012
Honda
Accord (with manual climate) (gunmetal)
2008
2012
Honda
Accord (with manual climate) (taupe)
2008
2012
Honda
Civic (EX / EX-L / Si)
2014
2015
Honda
Civic (LX)
2014
2015
Honda
Civic (with nav)
2013
2013
Honda
Civic (without nav)
2013
2013
Honda
Civic (with nav)
2012
2012
Honda
Civic (without nav)
2012
2012
Honda
Civic (with nav) (with gray dash)
2009
2011
Honda
Civic (with nav) (with taupe dash)
2009
2011
Honda
CR-V
2016
2016
Honda
CR-V
2015
2015
Honda
CR-V (with nav)
2012
2014
Honda
CR-V (without nav)
2012
2014
Honda
CR-V (w nav)
2010
2011
Honda
CRZ
2011
2016
Honda
Fit
2015
2017
Honda
Fit (with nav)
2009
2013
Honda
Fit (without nav)
2009
2013
Honda
HR-V
2016
2017
Honda
Insight (EX, LX, nav)
2010
2014
Honda
Insight (base model)
2010
2014
Honda
Odyssey (EX, EX-L, Touring)
2014
2017
Honda
Odyssey (LX)
2014
2017
Honda
Odyssey
2011
2013
Honda
Pilot
2016
2016
Honda
Pilot
2012
2015
Honda
Pilot
2009
2011
Honda
Ridgeline (without touchscreen radio)
2017
2017
Honda
Ridgeline
2009
2014

Converter adjustment instructions:
- After completing all of the necessary connections, turn the adjustment pots all of the way down by rotating them completely counter-clockwise.
- Turn the stereo system on and adjust the main volume control on the stereo to approximately 3/4 maximum volume.
- Select one of the adjustment pots and turn it slowly clockwise until you notice audio distortion and then stop.
- Turn the remaining pot to the same position as the previously adjusted pot.