Honda Acura 08+ Factory Radio Add A Subwoofer Amplifier Plug & Play Wire Harness

  • Sale
  • $ 35.99


Honda Acura Factory Radio Add A Subwoofer Amplifier Plug & Play Wire Harness



Want to add a subwoofer to your original stereo?

Don’t want or know how to cut into your wiring?


Take the wiring guess work out of the installation with this plug and play wire harness!  Installation is as easy as 1, 2, 3!
  1. Remove your OEM factory radio
  2. Unplug the OEM factory wiring and plug in this wire harness
  3. Reinstall your OEM factory radio
What is it?

This wire harness provides a connection for one set of RCA cables to provide an audio signal to an external amplifier.  Also pre-installed on the harness is a remote amplifier turn on wire.  This wire, along with a set of RCA cables, is run to your aftermarket amplifier.  All that’s left for you to do is connect the main power wire from your battery and ground. (Not included)

What you will receive
  • One (1) plug and play wire harness
  • One (1) Bass Knob
  • One (1) 3ft RCA Cable
  • One (1) 12ft RCA Cable
Compatibility Notes
  • Audio volume to the amplifier can be adjusted by the dials on the harness.
  • RCA colors and bass knob style may vary. We do our best to send what is pictured, however depending on inventory at the time of order we may substitute.  Rest assured the quality is the same, just appearance may be different!(When installed you don't see RCAs anyway!)

Compatibility 

Make MODEL FROM TO
Acura TL (with nav) 2009 2014
Acura TL (without nav) 2009 2014
Acura TSX (with nav) 2009 2014
Acura TSX (without nav) 2009 2014
Honda Accord  (without nav)  (with auto climate) 2013 2017
Honda Accord  (without nav)  (with manual climate) 2013 2017
Honda Accord  (with nav)  (gunmetal) 2008 2012
Honda Accord  (with nav)  (taupe) 2008 2012
Honda Accord  (without nav)  (with auto climate)  (gunmetal) 2008 2012
Honda Accord  (without nav)  (with auto climate)  (taupe) 2008 2012
Honda Accord  (with manual climate)  (gunmetal) 2008 2012
Honda Accord  (with manual climate)  (taupe) 2008 2012
Honda Civic  (EX / EX-L / Si) 2014 2015
Honda Civic  (LX) 2014 2015
Honda Civic  (with nav) 2013 2013
Honda Civic  (without nav) 2013 2013
Honda Civic  (with nav) 2012 2012
Honda Civic  (without nav) 2012 2012
Honda Civic  (with nav)  (with gray dash) 2009 2011
Honda Civic  (with nav)  (with taupe dash) 2009 2011
Honda CR-V 2016 2016
Honda CR-V 2015 2015
Honda CR-V  (with nav) 2012 2014
Honda CR-V  (without nav) 2012 2014
Honda CR-V  (w nav) 2010 2011
Honda CRZ 2011 2016
Honda Fit 2015 2017
Honda Fit  (with nav) 2009 2013
Honda Fit  (without nav) 2009 2013
Honda HR-V 2016 2017
Honda Insight  (EX, LX, nav) 2010 2014
Honda Insight  (base model) 2010 2014
Honda Odyssey  (EX, EX-L, Touring) 2014 2017
Honda Odyssey  (LX) 2014 2017
Honda Odyssey 2011 2013
Honda Pilot 2016 2016
Honda Pilot 2012 2015
Honda Pilot 2009 2011
Honda Ridgeline  (without touchscreen radio) 2017 2017
Honda Ridgeline  2009 2014

Converter adjustment instructions:
  1. After completing all of the necessary connections, turn the adjustment pots all of the way down by rotating them completely counter-clockwise.
  2. Turn the stereo system on and adjust the main volume control on the stereo to approximately 3/4 maximum volume.
  3. Select one of the adjustment pots and turn it slowly clockwise until you notice audio distortion and then stop.
  4. Turn the remaining pot to the same position as the previously adjusted pot.