Factory Radio Add A Subwoofer Amplifier Plug and Play Harness Fits Nissan Subaru

  • Sale
  • $ 25.99


Factory Radio Add A Subwoofer Amplifier Plug and Play Harness Fits Nissan Subaru
Want to add a subwoofer to your original stereo?

Don?t want or know how to cut into your wiring?


Take the wiring guess work out of the installation with this plug and play wire harness!  Installation is as easy as 1, 2, 3!
  1. Remove your OEM factory radio
  2. Unplug the OEM factory wiring and plug in this wire harness
  3. Reinstall your OEM factory radio

What is it?

This wire harness provides a line out converter for connection to one set of RCA cables to provide an audio signal to an external amplifier.  Also pre-installed on the harness is a remote amplifier turn on wire.  This wire, along with a set of RCA cables, is run to your aftermarket amplifier.  All that?s left for you to do is connect your own main power wire from your battery and a ground.


What you will receive
  • One (1) plug and play wire harness

Alternate Options:

Need additional parts for your installation?  Check out our other listings where RCA cables, bass knobs, and amps kits are included!

Compatibility Notes

  • Audio volume to the amplifier can be adjusted by the dials on the harness.  For easier access we recommend using an external volume knob.(Not included but we can provide one)
  • If this is being installed on a vehicle with a "premium sound" system such as Pioneer, this harness may need to be connected at the Pioneer amp and not directly at the radio.
  • A variety of wire colors may be used for the remote wire coming off the harness.  Regardless of color, rest assured it is for the remote turn on of an amplifier.
Compatible with these models

MODEL From To
City Express 2015 2018
FX35, FX50  2009 2013
G37 2008 2013
G35 2007 2008
G25 2011 2012
G25 2011 2012
G25 2011 2012
CX-5 2016 2016
370Z  2009 2020
Altima 2016 2018
Altima 2014 2015
Altima 2013 2013
Altima 2013 2013
Altima 2010 2012
Altima 2007 2009
Armada 2013 2015
Armada 2008 2012
Cube 2009 2014
Frontier 2016 2018
Frontier 2016 2017
Frontier 2013 2015
Frontier 2013 2015
Frontier 2012 2012
Frontier 2009 2011
Frontier 2009 2011
Frontier 2009 2011
Frontier 2008 2008
Juke 2015 2017
Juke 2011 2014
Kicks 2018 2019
Leaf 2018 2019
Leaf 2012 2017
Maxima 2016 2019
Maxima  2009 2014
Maxima  2009 2014
Maxima  2007 2008
Maxima  2007 2008
Murano 2015 2019
Murano 2009 2014
Murano 2009 2014
Murano 2009 2014
NP 300 2017 2018
NV 2015 2019
NV 2012 2014
NV200 2013 2018
Pathfinder 2013 2016
Pathfinder 2013 2016
Pathfinder 2008 2012
Quest 2011 2016
Quest 2011 2016
Quest 2011 2016
Rogue 2014 2018
Rogue 2012 2013
Rogue 2012 2013
Rogue 2012 2013
Rogue 2011 2011
Rogue 2008 2010
Rogue Select 2014 2015
Rogue Select 2014 2015
Rogue Sport 2017 2019
Sentra 2013 2018
Sentra 2007 2012
Sentra 2007 2012
Titan 2019 2019
Titan 2017 2018
Titan 2013 2015
Titan 2013 2015
Titan 2008 2012
Titan XD 2019 2019
Titan XD 2016 2018
Versa 2015 2018
Versa 2014 2014
Versa 2014 2014
Versa 2012 2013
Versa  2007 2011
Versa Note 2018.5 2019
Versa Note 2014 2018
Xterra 2014 2015
Xterra 2013 2013
Xterra 2009 2012
Xterra 2009 2012
Xterra 2008.5 2008.5
Forester 2014 2015
Forester 2009 2013
Impreza  2012 2014
Impreza  2008 2011
Impreza Outback Sport  2011 2011
Impreza WRX  2013 2014
Impreza WRX STI  2008 2012
Legacy 2012 2014
Legacy 2010 2011
Outback 2012 2014
Outback 2010 2011
WRX  2015 2015
XV Crosstrek  2013 2014
Equator 2009 2011
Equator 2009 2011

Converter adjustment instructions:
  1. After completing all of the necessary connections, turn the adjustment pots all of the way down by rotating them completely counter-clockwise.
  2. Turn the stereo system on and adjust the main volume control on the stereo to approximately 3/4 maximum volume.
  3. Select one of the adjustment pots and turn it slowly clockwise until you notice audio distortion and then stop.
  4. Turn the remaining pot to the same position as the previously adjusted pot.